Whirlpool 940 用户手册

You can stop your dishwasher anytime during a cycle.

1. Open the door slightly. 

2. Wait for the spraying action to stop. Then open the door all 

the way, if needed. 

3. Close the door to continue the cycle.

1. Turn the Cycle Control knob slowly clockwise until you hear 

water draining. Let the dishwasher drain completely.

2. Open the door.

3. Turn the Cycle Control knob to OFF.

Before using your dishwasher, remove all packaging materials. 
Read this entire Use and Care Guide. You will find important 
safety information and useful operating tips.

A power supply of 120 volts, 60 Hz AC, 15 or 20 amps, is 
required.

1. Plug into a grounded 3 prong outlet.

2. Scrape large food soil and hard items (toothpicks or bones) 

from dishes.

3. Properly load the dishwasher. (See “Dishwasher Loading.”) 

Make sure nothing prevents the spray arm(s) from spinning 
freely.

4. Add detergent and check the rinse aid dispenser. Add rinse 

aid if needed. (See “Dishwasher Use.”)

5. Push door firmly closed. The door latches automatically. Run 

hot water at the sink where you will connect dishwasher until 
water is hot. (See “Dishwasher Efficiency Tips.”) Turn off the 
water and hook the dishwasher to the faucet. (See 
“Connecting Your Dishwasher.”) Turn on the hot water.

6. Press the desired cycle and option selections. (See 

“Dishwasher Use.”) 

You can stop your dishwasher anytime during a cycle.

1. Open the door slightly. 

2. Wait for the spraying action to stop. Then open the door all 

the way, if needed. 

3. Close the door to continue the cycle.

1. Turn the Cycle Control knob slowly clockwise until you hear 

water draining. Let the dishwasher drain completely.

2. Open the door.

3. Turn the Cycle Control knob to OFF.