Braun MD9 & OC9 用户手册
8
8
out of the magnetic holder (b), hold it
over the washbasin and turn the unit on.
Use
Fill the water container 1 with water
again and add mouthwash if desired.
Place it firmly onto the motor part (c).
Attach one of the jets 4 to the handle 8
until it clicks in place (d). Turn the jet to
the direction desired.
again and add mouthwash if desired.
Place it firmly onto the motor part (c).
Attach one of the jets 4 to the handle 8
until it clicks in place (d). Turn the jet to
the direction desired.
Select the water pressure with the water
impact control 5; it is best to start with
the gentlest pressure (setting 2), espe-
cially if your gums tend to bleed or if
children are using the oral irrigator.
To remove resistant food particles, you
may use the press button 6 for maximum
water pressure (corresponding to setting
8 on the water impact control 5).
impact control 5; it is best to start with
the gentlest pressure (setting 2), espe-
cially if your gums tend to bleed or if
children are using the oral irrigator.
To remove resistant food particles, you
may use the press button 6 for maximum
water pressure (corresponding to setting
8 on the water impact control 5).
Bend over the washbasin and guide the
jet to your teeth. Then turn the unit on
with switch 7. The water jet impulses will
start in a few seconds. Keep your mouth
slightly open to allow the water to run into
the washbasin.
jet to your teeth. Then turn the unit on
with switch 7. The water jet impulses will
start in a few seconds. Keep your mouth
slightly open to allow the water to run into
the washbasin.
Single and multiple jet
The oral irrigator jet removes remaining
food particles from between your teeth
while also massaging your gums. There
are two different jet functions:
food particles from between your teeth
while also massaging your gums. There
are two different jet functions:
Single jet: Point of the jet in position (e) to
clean the teeth and the spaces between
the teeth and to remove resistant food
particles (materia alba).
clean the teeth and the spaces between
the teeth and to remove resistant food
particles (materia alba).
Multiple jet: Point of the jet in position (f)
to massage the gums and keep them
healthy.
to massage the gums and keep them
healthy.
Begin with the single jet. Guide the water
to the teeth and especially to the spaces
between the teeth. Then massage the
gums with the multiple jet.
to the teeth and especially to the spaces
between the teeth. Then massage the
gums with the multiple jet.
The jet can easily be switched from one
function to the other. Turn off the oral
irrigator with switch 7 (to avoid uncon-
trolled water spraying) and press the
point of the jet in or out. Then turn the
unit on again with switch 7.
function to the other. Turn off the oral
irrigator with switch 7 (to avoid uncon-
trolled water spraying) and press the
point of the jet in or out. Then turn the
unit on again with switch 7.
After use
Do not turn off the unit unless the water
container is entirely empty. Bacteria
could otherwise collect in the remaining
water if the unit is not used for some time.
container is entirely empty. Bacteria
could otherwise collect in the remaining
water if the unit is not used for some time.
After use, return the handle 8 to the
magnetic holder (b). The attachable jets
4
magnetic holder (b). The attachable jets
4
can be stored in the removable com-
partment 3.
Cleaning
Clean the motor part 2 with a damp
cloth. Wipe the handle 8 dry. The water
container 1 and the removable com-
partment for the jets can be washed
in the dishwasher.
cloth. Wipe the handle 8 dry. The water
container 1 and the removable com-
partment for the jets can be washed
in the dishwasher.
Dental centre
Your Braun Oral-B Plak Control oral
irrigator can easily be turned into a
complete dental centre: The connections
j
irrigator can easily be turned into a
complete dental centre: The connections
j
on the side of the motor part 2 allow
you to connect a Braun Oral-B Plak
Control plaque remover. The plaque
remover and the oral irrigator are then
operated as a dental centre using the
cord of the irrigator.
The charging unit for the plaque remover
(type 4723) is available at your dealer.
Control plaque remover. The plaque
remover and the oral irrigator are then
operated as a dental centre using the
cord of the irrigator.
The charging unit for the plaque remover
(type 4723) is available at your dealer.
Subject to change without notice.
This product conforms to the EMC-
Requirements as laid down by the
Countil Directive 89/336/EEC).
Requirements as laid down by the
Countil Directive 89/336/EEC).
4714058_MD9_S.4-30.fm Seite 8 Freitag, 3. Mai 2002 11:09 11