Westinghouse EPA (49 state) WH5500 业主指南

下载
页码 86
18 
FEATURES
CONTROL PANEL FEATURES
1
8
2
3
4
7
5
6
Figure 11 – Control Panel Features
1. 
Engine Control Switch (RUN/STOP for 
Manual Start Units): 
•  RUN - In the RUN position, the switch 
allows the generator to be started (for 
manual start models).
•  STOP - In the STOP position, the switch 
stops the engine.
2. 
Hour Meter: Displays how many hours the 
generator has been run when under load.
3. 
Main Circuit Breaker: The main circuit 
breaker controls total output of all outlets to 
protect the generator.
4. 
120/240-Volt, 30-Amp Twist Lock Outlet 
(NEMA L14-30R): Outlet can supply either 
120V or 240V output.
5. 
120-Volt, 20-Amp Duplex Outlets (NEMA 
5-20R): Each outlet is capable of carrying a 
maximum of 20 amps on a single receptacle 
or a combination of both receptacles.
6. 
20-Amp Circuit Breakers: Each circuit 
breaker limits the current that can be 
delivered through the 120-volt duplex outlets 
to 20 amps.
7. 
Ground Terminal: The ground terminal is 
used to ground the generator.
8. 
Engine Control Switch (START/RUN/STOP 
for Electric Start Units):
•  START - When the switch is momentarily 
depressed and held in the 
START position, 
the electric start motor engages and starts 
the engine. Once the engine starts, release 
the switch. (The switch will automatically go 
to the 
RUN position.)
•  RUN - Once started, the switch will remain 
in the 
RUN position.
•  STOP - To stop the engine, move the switch 
to the 
STOP position.