GE ERESCO MF4 产品宣传册
ERESCO 42 MF4
Portable X-ray Unit 200 kV Directional Radiating Tube Head, air cooled
The ERESCO 42 MF4 is a 200 kV con-
stant potential portable X-ray tube
head using state of the art switching
technology with high radiation output
allowing shortest exposure times there-
by increasing productivity.
GE Sensing & Inspection Technologies
GE Sensing & Inspection Technologies
uses the number 42 to identify the supe-
rior penetration performance of its por-
table X-ray unit line. This means the
ERESCO 42 MF4 is capable of penetrating
42 mm (1.65”) Fe with a 2.0 density after a
ten-minute exposure using AGFA STRUC-
TURIX D7 film @ 700 mm (27.5”) FFD.
The X-ray tube head consists of a sturdy
The X-ray tube head consists of a sturdy
metal-ceramic X-ray tube and high volt-
age generator integrated into a rugged
compact housing. The air-cooled 200 kV/
900 W end-grounded X-ray tube is ther-
mally protected for extended life.
The high voltage generator generates
high-stability constant potential volt-
age at higher efficiency than conven-
tional line frequency equipment.
The performance of the X-ray tube and
The performance of the X-ray tube and
the high voltage generator is continu-
ously monitored for protection and op-
erational safety. An on-board real time
clock facilitates fully automatic warm-
up routines for optimized and time-
saving tube conditioning. The flexible
connecting cable is heavy-duty and
light weight.
Additional Features
• Rugged construction with proven reliability
• Gas insulated high voltage section reduces size & weight
• End-grounded, Be-window, metal-ceramic X-ray tube
• DC voltage operation
• Modern power electronics provides high stability
• On-board real time clock supports fully automatic warm-up
• Extended operating range from 5 kV to 200 kV enables flexible use
• Large 40° x 60° emergent beam
• Optimized air-flow cooling for efficient heat dissipation
• 100% duty cycle at 30° Celsius (86° F)
• Built-in fail-safe warning lamp
• CE certification according to EMC and Low Voltage Directives
• French Standard NFC 74 100 compliant
• BfS certification (PTB approval)
• Water / dust resistant in accordance with protection class IP65
• Produced under ISO 9001 certified quality management system
• Gas insulated high voltage section reduces size & weight
• End-grounded, Be-window, metal-ceramic X-ray tube
• DC voltage operation
• Modern power electronics provides high stability
• On-board real time clock supports fully automatic warm-up
• Extended operating range from 5 kV to 200 kV enables flexible use
• Large 40° x 60° emergent beam
• Optimized air-flow cooling for efficient heat dissipation
• 100% duty cycle at 30° Celsius (86° F)
• Built-in fail-safe warning lamp
• CE certification according to EMC and Low Voltage Directives
• French Standard NFC 74 100 compliant
• BfS certification (PTB approval)
• Water / dust resistant in accordance with protection class IP65
• Produced under ISO 9001 certified quality management system
Standard Delivery Scope
See product info “ERESCO MF4 Control”
GE
Sensing & Inspection Technologies