VBrick Systems MPEG-2 用户手册

12

EtherneTV Media Distribution System

 ftp 172.22.117.70

root

331 Password required for root.

admin

230 User root logged in

bin

200 Type set to I.

cd wfs/mpg

250 CWD command successful.

put vbs1d1.sdp

200 PORT command successful.

150 Opening BINARY mode data connection for vbs1d1.sdp

226 Transfer complete.

ftp: 739 bytes sent in 0.12 Seconds

bye

When the 

 is configured for Local, the STB will display static listings and previews 

of multiple channels on the network. These listing are configured in an xml file. The xml file 
must be modified for each network installation so that IP addresses, port numbers, encoder 
types and program listings correspond to actual network settings. This file is edited for local 
mode installations only and does not apply when operating in 

 or 

 

mode. For detailed examples of how to edit the xml file, go to XML Configuration Examples 
on page 23.

In MCS mode, when the volume has been manually turned down using the remote (and the 
configured audio level is significantly higher), there will be a brief burst of higher volume 
when switching views between preview and full screen. Reduce the configured audio level to 
avoid abrupt changes in volume.

Local UI Location When the start mode is configured for Local, the STB will allow static 

listings and previews of multiple channels on the network. You can 
use this setting to create a custom user interface.

Home Page 
Location/Enable

This parameter determines the location of the home page that is 
displayed when the WWW button is pressed on the IR remote control. 
When this option is disabled, the Home page will not be loaded when 
the WWW button is selected.

Main and Line 1 
Volume

These parameters determine the initial volume level the STB will 
provide to the TV or monitor. Set both to same value. The volume can 
be changed using the IR remote control but will revert to the 
configured values at start-up.