Sierra Wireless RAVEN 1X 20070914 用户手册

下载
页码 203
Configuration Commands
Rev 3.0B Feb.08
 
139
requests.n=0 : Disabled.  The Raven X will not send out 
replies to DHCP requests.
Tip:   For PPPoE, set *DHCPSERVER=0. 
*HOSTAUTH=n
Host Authentication Mode: Use PAP or CHAP to request the 
user login and password during PPP or CHAP negotiation on 
the host connection. The username and password set in 
*HOSTUID and *HOSTPW will be used. 
n=0 : Disable PAP or CHAP request (Default). 
n=1 : PAP and CHAP.  
n=2 : CHAP
Tip:  For PPPoE, set *HOSTAUTH=1 or *HOSTAUTH=2. 
*HOSTNETMASK=n.n.n.n
Subnet mask for the host interface. Allows communication 
with a subnet behind the host interface. 
n.n.n.n = subnet mask, example 255.255.255.0.
*HOSTPEERIP=d.d.d.d
Set or query the IP address that can be used to directly contact 
the PinPoint X once a cellular connection is established. If this 
value is not specified, 192.168.13.31 will be used. 
d.d.d.d=local or peer IP address of the modem.
Note:  This is not normally used nor needed by user applications. 
*HOSTPRIVIP=d.d.d.d
Set or query the private IP address that is to be negotiated by 
the 1x connection if *HOSTPRIVMODE =1. 
d.d.d.d=IP Address
*HOSTPRIVMODE=n
Set or query whether a private or public (network) IP is to be 
used when the Host initiates a 1x connection to the modem.
n=0 : Public (network) IP Mode: When the Host initiates a 
PPP connection, the host will be given the network IP 
address that was obtained from the cellular carrier while 
registering on the network. If the network issues a new IP