Roberts Radio 63I 用户手册

1.  Carefully extend the telescopic aerial.

2. Press 

the 

On/Standby button to switch on the radio. If the radio has 

been used before the last used mode will be selected.

3. Press 

the 

Radio button as needed so that DAB radio mode is selected 

on the display. 

4.  If this is the fi rst time that DAB mode is used a quick scan of the Band  III 

DAB channels will be carried out. The display will show 'Scanning'.  (If 
the radio has been used before the last used station will be selected 
instead.) 

 

During the scanning process, as new stations are detected the station 
counter will increase and the stations will be added to the list which 
is stored in the radio. The bar graph indicates the progress of the 
scan.

5.  When scanning is completed  the radio will list the stations found (in 

numeric-alpha order 0....9...A...Z), unless it has previously been tuned 
to a DAB station.

 Press 

the 

Menu Up or Down buttons to scroll through the list of 

available DAB radio stations. 

 Press 

the 

Select button to select the highlighted station. The display 

may show 'Connecting...' while the radio re-tunes.

 Use 

the 

Volume buttons to set the sound level as needed.

6.  If the station list is still empty after the scan the display will show 

'Service not available'. If no stations are found it may be necessary 
to relocate your radio to a position giving better reception.

3

5

5

2

5

5

5