Tekkeon MYPOWER ALL PLUS MP3450 R2 用户手册
5
USER GUIDE
Charging with a Third Party Power Supply
You can use a third party power supply to charge myPower ALL Plus as long as it has DC output voltage range
from 12V to 20V, with a minimum 1.5A output current. myPower ALL Plus will not charge its internal battery if
the input current is lower than 1.5A. To fit the DC jack, the DC plug must have an outside diameter of 5.5mm
and an inside diameter of 2.1mm (5.5 x 2.1mm).
from 12V to 20V, with a minimum 1.5A output current. myPower ALL Plus will not charge its internal battery if
the input current is lower than 1.5A. To fit the DC jack, the DC plug must have an outside diameter of 5.5mm
and an inside diameter of 2.1mm (5.5 x 2.1mm).
If you would like to use one power supply for both your laptop and myPower ALL Plus, use the power supply
with the highest output current (Amps). For example, if the output of your laptop’s power supply is 19V 4.0A,
while the output of the myPower ALL Plus power supply is 20V 3.0A, use your laptop charger to charge both
myPower ALL Plus and your laptop.
with the highest output current (Amps). For example, if the output of your laptop’s power supply is 19V 4.0A,
while the output of the myPower ALL Plus power supply is 20V 3.0A, use your laptop charger to charge both
myPower ALL Plus and your laptop.
If your laptop power supply plug does not fit into the myPower ALL Plus DC IN port, you can use an optional input
adapter tip, available at the Tekkeon online store.
adapter tip, available at the Tekkeon online store.