QMS 1800486-001C 用户手册
.
% ($
% .
!
,
The Router menu allows you to set the Internet address of a router. The address is in
the format
the format
xxx.xxx.xxx.xxx.
-
.
The Service menu allows you to identify the number of faces that have been printed
(see chapter 8, “Troubleshooting,”) and to clear service messages (see chapter 6,
“Maintenance”).
(see chapter 8, “Troubleshooting,”) and to clear service messages (see chapter 6,
“Maintenance”).
-6
&
The Board Test menu allows you to test the printer’s flash, Ethernet, ASICS, and
DRAM. For complete information, see chapter 8, “Troubleshooting.”
DRAM. For complete information, see chapter 8, “Troubleshooting.”
-&
The Test Page menu allows you to verify that the printer is able to print. For complete
information, see chapter 8, “Troubleshooting.”
information, see chapter 8, “Troubleshooting.”
Menu
Router
Choices
Each
xxx.xxx.xxx.xxx triplet can have a value of 001–254.
Default
000.000.000.000
Notes
If gateways are not used with your network, the router address should
remain 000.000.000.000. (Check with your network administrator.)
remain 000.000.000.000. (Check with your network administrator.)
Once you save your changes to this menu, the printer automatically
reboots.
reboots.
The address must consist only of numbers and periods. Selecting a let-
ter or another symbol results in an error message.
ter or another symbol results in an error message.
Any
xxx value between 1 and 9 must begin with 00 (for example, 1 is
entered as 001, and 9 is entered as 009).
Any
xxx value between 10 and 99 must begin with 0 (for example, 10 is
entered as 010, and 99 is entered as 099).