QMS 1800486-001C 用户手册
6&*
#=
6#
$.
+
(#45
»
Note:
If you have a duplex model, the lower input feeder should not be removed. Skip
If you don’t have a lower input feeder installed, skip to “Repack the Printer” on page
9-14.
9-14.
1
Remove the plastic side covers from
the sides of the input feeder.
the sides of the input feeder.
»
Note:
The illustrations for steps 1
through 5 show the printer without the
duplexer.
duplexer.
Do not use these instructions for
the duplex model, since the lower
input feeder will remain installed.
the duplex model, since the lower
input feeder will remain installed.
2
Locate the cable at the left rear of
the optional feeder that connects it
to the printer, and then unplug it.
the optional feeder that connects it
to the printer, and then unplug it.
3
Switch the lower input feeder cover
plate and the printer cover plate
back to their original position.
plate and the printer cover plate
back to their original position.