QMS 1800486-001C 用户手册
$1&
.
%
!!
d
On the Configuration tab, choose the Add button.
e
In the Select Network Component Type window, select Service, and then
choose the Add button.
choose the Add button.
f
In the Select Network Service window, select Microsoft, and then select the
File and Print sharing entry that matches your network.
File and Print sharing entry that matches your network.
g
Choose the OK button, and follow the instructions.
h
Restart your computer for the changes to take effect.
5
On the Sharing tab, select the Shared As: radio button.
6
If you use
a
Share-level access control, you can enter a
Share name—a name for the printer.
You’ll use this name and the computer’s name to identify the printer.
Comment—a location or other description.
This is optional, but it will help others locate and identify your printer.
Password
b
User-level access control, you can choose the Add button and then select
specified users to share the printer.
specified users to share the printer.
7
Choose the OK button.
Verify that the listed users are correct.
8
Choose the OK button.
An outstretched hand is added to the bottom of the printer’s icon in the printer
folder to indicate that the printer can be shared.
folder to indicate that the printer can be shared.
! &'()
»
Note:
This section explains how to configure the QMS magicolor 2 DeskLaser printer
driver in Windows NT 4.0 for sharing. If you’re using Windows 95/98, refer to
“Windows 95/98” on page 2-42. Printer sharing can be used only with attached
computers that are running either Windows 95/98 or Windows NT 4.0.
“Windows 95/98” on page 2-42. Printer sharing can be used only with attached
computers that are running either Windows 95/98 or Windows NT 4.0.