QMS 1800486-001C 用户手册
$
1
.
.
#
. $
1
In the printer driver (Paper tab, Paper Type option), select Transparency.
2
Remove the media cassette from the printer (and remove any media in the
cassette).
cassette).
3
Load the new media.
Type
Use any transparencies (also known as OHP film) that meet normal photo-
copier standards and that can withstand the fusing temperature (392
copier standards and that can withstand the fusing temperature (392
°
F/
200
°
C). We recommend
– Xerox 3R3117
– 3M CG3700
– 3M CG3710
Use only transparency sizes letter and A4.
Weight
24–41.75 lb (90–157 g/m
2
)
Print Mode
Transparency
Notes
Do not fan transparencies before printing.
Be sure to feed the striped edge as the trailing edge, although the trans-
parency vendor may recommend that the striped edge is first into the
printer.
parency vendor may recommend that the striped edge is first into the
printer.
Keep the media path clean. Transparencies are especially sensitive to a
dirty media path. If there are shadows on either the top or the bottom of
the sheets, refer to chapter 6, “Maintenance,” for instructions on how to
clean the printer.
dirty media path. If there are shadows on either the top or the bottom of
the sheets, refer to chapter 6, “Maintenance,” for instructions on how to
clean the printer.
Check your application documentation for other information about printing
on transparencies.
on transparencies.
Remove transparencies from the output tray immediately to avoid static
buildup.
buildup.