Network Technologies DVB-ASI to IP 用户手册
ASI-IP-GTW User's Manual
Page
43
Resulting total rate: This is the resulting total IP bitrate including FEC
overhead for this channel. The Status frame contains status
parameters related to the FEC setting.
Column UDP port: This parameter is the UDP port used for the column
FEC data. The value is always Media UDP port + 2 which is in
accordance with Pro-MPEG CoP 3.
Row UDP port: This parameter is the UDP port used for the row FEC
data. The value is always Media UDP port + 4 which is in accordance
with Pro-MPEG CoP 3.
Data rate: This parameter shows the IP data rate for this channel
excluding FEC data.
Column FEC rate: This parameter shows the IP data rate for the column
FEC data of this channel.
Row FEC rate: This parameter shows the IP data rate for the row FEC
data of this channel.
In order to make it possible to demonstrate the function of the FEC
engine, ASI-IP-GTW provides a mode to drop IP packets on the
transmitter.
Frame drop: Enter the percentage of packets to be dropped from this
channel. This value is not stored in the unit and must be entered after
each power on.
Frames dropped: This counter shows the number of frames discarded
at the output of the unit.
overhead for this channel. The Status frame contains status
parameters related to the FEC setting.
Column UDP port: This parameter is the UDP port used for the column
FEC data. The value is always Media UDP port + 2 which is in
accordance with Pro-MPEG CoP 3.
Row UDP port: This parameter is the UDP port used for the row FEC
data. The value is always Media UDP port + 4 which is in accordance
with Pro-MPEG CoP 3.
Data rate: This parameter shows the IP data rate for this channel
excluding FEC data.
Column FEC rate: This parameter shows the IP data rate for the column
FEC data of this channel.
Row FEC rate: This parameter shows the IP data rate for the row FEC
data of this channel.
In order to make it possible to demonstrate the function of the FEC
engine, ASI-IP-GTW provides a mode to drop IP packets on the
transmitter.
Frame drop: Enter the percentage of packets to be dropped from this
channel. This value is not stored in the unit and must be entered after
each power on.
Frames dropped: This counter shows the number of frames discarded
at the output of the unit.