jWIN ILuv i903 用户手册

Noise-Canceling Headset w/ Bluetooth wireless technology       V10M10_IM_EN_12072006 

www.i-Luv.com 

To turn on the i903 and/or the included wireless audio transmitter (dongle), follow the 
instruction below: 

• 

                                                                                         
Please find the on/off switch located on the left 
earpiece. 

• 

Three way Switch functions:  

                 (Position 1) OFF: Headset is off 
                 (Position 2) Bluetooth: Bluetooth is in standby mode 

 (Position 3) N/C On: Noise Canceling feature 
Activated 

 

To Enable Bluetooth Feature on i903 Headset: 
Once the headset is set to standby mode, you could activate the Bluetooth wireless 
technology by pressing and holding the Multi-function button on the headset for 
approximately three (3) seconds. The i903 headset will make a high-pitched beep. 
Followed by blue blinking light, indicating the device has been turned on.  
 
To Enable Bluetooth Feature on Wireless Audio Transmitter (Audio Dongle): 
Press and hold the On/Off Button on the Dongle for three (3) Seconds, then you will see 
a blue blinking light on the button, indicating device is on and Bluetooth feature is ready. 

 

 
 
 
 

 
 
 
 
 
 

To turn off the i903’s Bluetooth feature or go into standby mode  
Standby mode: 
Press and hold the Multi-function button for five (5) seconds, then you will hear a beep 
followed by red light flashing four times 
OFF Mode: 
 You could simply use the On/Off button on the headset. 
 
To Turn Off the Dongle: 
Press and hold On/Off button for five (5) Seconds, you will see a red light flashes for four 
times, indicating the device is off