Marantz Computer Hardware pmd671 用户手册
- 42 -
-dB
-dB
-dB
-dB
-dB
-dB
-dB
-dB
STORE button for about 2 seconds.
2. With Preset
flashing in the
display, double
display, double
click the ENTER button
.
3. Press and release the F.FWD/+ button
until Auto Cue is
displayed.
displayed.
4. With Auto Cue
flashing, press
and release the
and release the
ENTER button
.
On/Off menu choice is flashing.
5. Press and re-
lease the F.FWD/
+ button
+ button
to
toggle between On and Off.
How to set or change Auto Cue
Quick instructions
Press & hold
MENU/STORE 2 sec ....... Preset
Double Click ENTER
.................. RecFormat
Press F.FWD/+
until ...................... Auto Cue
Press ENTER
..................................... Off/On
Press F.FWD/+
........................ toggle Off/On
Press ENTER
............................ milliseconds
Press F.FWD/+
.................... tab milliseconds
Press ENTER
.................................. decibels
Press F.FWD/+
.......................... tab decibels
Press ENTER
................................ Auto Cue
Press
MENU/STORE .................... store & exit
6. When correct,
press and
release the
ENTER button
release the
ENTER button
. Milliseconds choice flashing.
Note
If you don't want to change the Milliseconds or dB settings
If you don't want to change the Milliseconds or dB settings
press and release the ENTER button
several times to
tab to Auto Cue flashing.
7. Press and
release the
F.FWD/+ button
F.FWD/+ button
to tab
through milliseconds.
8. When correct, press and release the ENTER
button
.
Decibel choice
flashing.
flashing.
9. Press and
release the
F.FWD/+ button
F.FWD/+ button
The display returns to Auto Cue flashing.
You can:
•
•
Press and release the F.FWD/+ button
or the -/
F.REV button
to tab to another menu choice, or
•
Press and release the
MENU/STORE button to write
the menu changes and return to stop mode, or
•
Press and release the CANCEL button
to cancel all
menu changes and return to stop mode.
S.Monitor
Stop Monitor lets you monitor the source signal
when in stop as well as during record. The
source signal is available at the PHONES jack
or Internal Speaker.
when in stop as well as during record. The
source signal is available at the PHONES jack
or Internal Speaker.
Default setting is Off.
How to set or change S.Monitor
to tab through decibel choices.
10. When correct,
press and re-
lease the EN-
TER button
lease the EN-
TER button
.
1. From stop, press and hold the
MENU/
STORE button
for about 2
seconds.
for about 2
seconds.
Quick instructions
Press & hold
MENU/STORE 2 sec ....... Preset
Double Click ENTER
.................. RecFormat
Press F.FWD/+
until ...................... S.Monitor
Press ENTER
..................................... Off/On
Press F.FWD/+
........................ toggle Off/On
Press ENTER
................................ S.Monitor
Press
MENU/STORE .................... store & exit
1. From stop, press
and hold the
MENU/