Lowrance electronic 8VHF 用户手册
5.
You now have the following options: RESEND, PAUSE, CANCEL:
6.
To RESEND the call, press RESEND softkey (AIS/IC key) to enter "HOLD DISTRESS 3
SECONDS TO SEND" screen. Hold down DISTRESS key for 3s to resend the call or press
EXIT softkey (AIS/IC key) to return to waiting for an acknowledgement call.
7.
To PAUSE the call, press PAUSE softkey (WX/NAV key) to pause the "Call repeat" mode,
press EXIT softkey (AIS/IC key) to resume the same call.
8.
To CANCEL the call, press CANCEL softkey (GO/MOB key) to enter "DISTRESS CALL SEND
CANCEL" screen.
• Press NO softkey (WX/NAV key) to return to waiting for an acknowledgement call.
• Press YES softkey (AIS/IC key) to send the DISTRESS CANCEL call. Then press PTT to report
• Press NO softkey (WX/NAV key) to return to waiting for an acknowledgement call.
• Press YES softkey (AIS/IC key) to send the DISTRESS CANCEL call. Then press PTT to report
your situation using the handset mic, after the report, press EXIT to return to the normal
operating mode.
9.
After receiving the acknowledgment, press SILENC softkey (AIS/IC key) then reply using
the microphone, or press EXIT key to quit the current distress acknowledgment.
Note: Prior to receiving an acknowledgement, the distress alert call cannot immediately be
terminated by you, it can only be cancelled by completing the distress call cancel process as
described above (step 8).
described above (step 8).
8-2 Receiving a distress call (DISTRESS!)
DISTRESS
UNDEFINED
123456789
82
°50.123'N
▼ 00:01
An alert sounds when a distress call (DISTRESS!) is received.
1.
1.
Press SILENC softkey (AIS/IC key) to silence the alert. You do not need to send an
acknowledgement.
2.
The radio automatically selects CH16 after 10 seconds if no user intervention, or press
ACCEPT softkey (AIS/IC key) to change to CH16 immediately.
3.
Press +/- button or rotate the CH knob to view details of the distress call. Details
include the user MMSI and nature of the emergency (if specified), also the time and the
location (if specified). If the location and time are not specified, these are replaced with
sequences of 9s and 8s respectively.
• The radio is capable of receiving enhanced LL position data if the vessel transmitting the
• The radio is capable of receiving enhanced LL position data if the vessel transmitting the
distress call is sending this. This provides the position of the distressed vessel to within
20 m (60 ft).
4.
Press PTT to establish voice contact or press EXIT key to quit the DISTRESS RECEIVE call.
Note: The call data is stored in the Distress Log and location data (DSC & DSE) sentence will
be output on the NMEA 0183 port for indication on a connected chartplotter / MFD.
be output on the NMEA 0183 port for indication on a connected chartplotter / MFD.
Lowrance - Link-8 Operation Instructions
59