IMC Networks IE-IMCV 用户手册
2
About IE-iMcV-MultiWay Features and Configuration
The IE-iMcV-MultiWay offers a full feature set including Auto Negotiation, Selective
Advertising, AutoCross, VLANs, SNMP management, loopback testing and OAM. Unit
software updates can be downloaded through TFTP or iView
Advertising, AutoCross, VLANs, SNMP management, loopback testing and OAM. Unit
software updates can be downloaded through TFTP or iView
2
(iConfig view).
IE-iMcV-MultiWay features include:
• SNMP manageable
• SNMP manageable
• OAM AH
o
IEEE 802.3ah Link OAM for per port monitoring (OAM AH)
• OAM AH Functions
o
Discovery
o
Link Performance Monitoring
o
Remote Loopback
o
Fault Detection
o
Link Fault
o
Dying Gasp
o
Critical Event
• OAM CFM
o
IEEE 802.1ag Connectivity Fault Management (OAM CFM)
o
OAM CFM Functions
o
Continuity Check
o
Loopback
• Speed/duplex modes
• 802.1q VLAN
• 802.1q VLAN
• Extra tagging with user-defined VLAN tag Ethertype
• Ethertype 88A8 as defined in 802.1ad
• Ethertype 88A8 as defined in 802.1ad
• Command Line Interface capable (CLI)
• Telnet
• Password assignment via CLI, Telnet or iView²
• Password assignment via CLI, Telnet or iView²
• DIP Switch configuration for Modes
As a CPE device, the IE-iMcV-MultiWay or IE-MultiWay can behave as a remote to an
iMcV-Giga-FiberLinX-II host when:
iMcV-Giga-FiberLinX-II host when:
1) The iMcV-Giga-FiberLinX-II:
• Is connected via the SFP ports on the IE-iMcV-MultiWay
• Is configured as a Host
• Uses firmware version A1 860-00D1 or higher
2) The SNMP card (if present):
• Uses SNMP firmware version 953-00C8 or higher