HP Cell Phone Accessories E6380-90019 用户手册
Chapter 6
169
Configuration - Screens and Control Fields
Frame Clock Output
(Gen)-(Anl) (User Defined)
Frame Clock Output
This field selects the frame clock signal to send to the FRAME CLOCK
OUT connector.
OUT connector.
Screen(s) Where Field is Present
INSTRUMENT CONFIGURE
(Gen)-(Anl)
This field is used with the
RF Offset
field to specify the amount of
frequency offset between the RF generator and RF analyzer.
This field is always displayed when the
RF Display
field is set to
Freq
.
See
for more
information.
Screen(s) Where Field is Present
INSTRUMENT CONFIGURE
(Gen)-(Anl) (User Defined)
This field defines the receiver-transmitter frequency offset when using
user-defined channel operation.
user-defined channel operation.
Use a positive value (such as 45 MHz) when the radio’s receive
frequency is higher than the transmit frequency.
frequency is higher than the transmit frequency.
Use a negative value (such as
−
45 MHz) when the radio’s receive
frequency is lower than the transmit frequency.
Operating Considerations
The value of this field is only used if the
RF Display
field is set to
Chan
, and the
RF Chan Std
field is set to
USER-DEF
.
For more information see the following related topics:
"Chan Space (User Defined)" field on page 164
"RF Chan Std" field on page 175
"RF Display" field on page 176
"RF Chan Std" field on page 175
"RF Display" field on page 176
Screen(s) Where Field is Present
INSTRUMENT CONFIGURE
Main Menu