Ericsson PHOTO R1900 用户手册

Loading Paper

10. Open the printer cover and look into the 

printer to make sure the roll paper or canvas 
media is feeding straight. The paper must feed 
straight so the printer can properly identify the 
edge of it.

If it is crooked or the front edge is visible, you 
may receive a paper jam error when you print. 
To avoid this, press the 

M

roll paper button for 

three seconds to back the paper out. Press the 

I

paper button to clear the paper out error, 

then load the roll paper or canvas media again.

11. For roll paper, turn the knobs on the roll paper holders backward to remove 

excess slack. (Leave two to three inches of slack on canvas media.)

12. Close the printer cover and do not open it during printing.

1. To remove your roll paper or canvas media prints, press the 

M

roll paper 

button to feed the paper forward, then cut off your printed photos straight 
across the paper at the cutting guideline.

Caution: 
Do not pull on the paper as you cut it to avoid damaging your printout. Also do not 
cut the paper too close to the printer to avoid paper feeding problems.

2. To continue printing on roll paper or canvas media, press the 

M

roll paper 

button again to return the paper to printing position.

3. If you are finished printing on roll paper or canvas media, press the 

M

roll 

paper button for three seconds to feed the paper backwards and out of the 
printer. If it does not feed all the way out, press the 

M

roll paper button again.

4. Turn the knobs on the roll paper holders backward to roll up the paper, then 

remove the paper and holders from the printer.

5. Press the 

I

paper button to stop the 

I

paper light from flashing.

Store the unused roll paper or canvas media in its original package away from high 
temperatures, humidity, and direct sunlight.