Fujitronic FH-777 用户手册

 

7

2. 

To clear the timer mode, press TIMER button for 16 times (one more press after it reaches 7.5 

hours); the TIMER indicator will be off. Or POWER off the unit to reset all setting. 

1. Press the COOL button, if the water level is above the minimum level, the COOL indicator 

will be turned on and the pump will start working.   

2. 

After about 3 minutes, the comfortable cool wind with moisture will come out from the unit. 

3. 

Press the COOL button again to turn the COOL mode off. The COOL indicator will be 

turned off too and fresh dry wind will come out. 

Note:   

1. 

If COOL mode is selected when the water is under the low level

 

or no water at all, the 

alarm will sound after 90 sec. The COOL indicator will blink continuously for about 10 sec. 

After 10 sec, the alarm stops and the COOL mode will be turned off too. 

2. 

The unit can be used without water as a normal electric fan. In this situation, please keep 

the COOL mode OFF. 

 

Specifications 

Rated 

Voltage 

Rated 

Frequency 

Rated 

Power 

Water 

Consumption 

Water 

Tank 

Capacity 

Dimensions 

(inch) WxDxH 

N.W. 

(lbs) 

120V~ 

60Hz 80W 

0.2-0.25L/h  4L 

12.13x11.50x 34.76  11.24 

 
 

 

 
z 

IMPORTANT! Disconnect the plug from the power outlet before cleaning and maintenance 

z 

The body of the unit should be cleaned with damp cloth moistened with mild soap. Do not 
clean it with wet cloth. 

z 

From time to time, depending on the nature of your water supply, you may need to clean the 
interior of the water tank. This can be done in the following manner: 

1) 

Fill the water tank with 1 cup (8 oz.) undiluted white vinegar; 

2) 

Let the solution stand for 20 minutes. 

3) 

With the vinegar in the water tank, clean all interior surfaces with a soft cloth or brush to 
help remove scale. 

4) 

Rinse the water tank thoroughly with clean water to remove scale and cleaning solution.