Clarity Video Eyeware 87392-11 用户手册

Clarity User Guide,

 

March 1, 2011 - Rev. 1.06 

                    

           Page 14

connection.  If you are using an Ethernet connection, then you must set the two ports in the 
TCP/IP Network Auto-Connect Settings box. 
 

Do not use a sharp object (pencil or pen point, paper clip, etc.) on the touch screen as it may 
scratch or tear the screen. Clean the screen with a microfiber cloth such as is used to clean 
eyeglasses.  A soft cloth slightly dampened with clear water may be used for hard-to-remove 
spots.  Turn the Clarity off before cleaning the screen. 

 
The Clarity is equipped with a touch screen display.  A mouse and keyboard can be installed 
on the rear bulkhead if desired.  A mouse is recommended to have at all times for manual 
alignment of progressives, bifocals and trifocals. There are two USB ports that can be used as 
well as two PS-2 connectors at the rear of the machine.  (See Fig. 1.3)  If you install a PS-2 
mouse or keyboard while the machine is ON, you will have to reboot the machine (cycle the 
power OFF and then ON) for the machine to recognize 
 there is a device connected. 
 
Once the unit is powered ON, it will boot to the main Job screen. (See Fig. 2.1.)  The 
program will open, initialize communications, and the camera will go through several checks.