Canon DP-V3010 说明手册
12
Nomenclature
■
Interface
Left side
Right side
7
A
g
8
9
9
A
q
A
A
a
A
s
A
A
d
A
f
A
h
A
j
7A
a
3G/HD-SDI input
terminal 1
terminal 1
Two input systems
corresponding to input 1.
corresponding to input 1.
8A
s
3G/HD-SDI
output terminal 1
output terminal 1
Monitor output
corresponding to 7A
corresponding to 7A
a
9A
d
3G/HD-SDI input
terminal 2
terminal 2
Two input systems
corresponding to input 2.
corresponding to input 2.
A
qA
f
3G/HD-SDI
output terminal 2
output terminal 2
Monitor output
corresponding to 9A
corresponding to 9A
d
A
g
LAN (10/100
BASE) terminal
BASE) terminal
Connects to display
controller.
The main unit connects
1 to 1 with the display
controller. It can also be
connected via a hub.
controller.
The main unit connects
1 to 1 with the display
controller. It can also be
connected via a hub.
A
h
USB port
Used to connect external
sensor for calibration
(
sensor for calibration
(
28) or USB memory for
export/import (
A
j
DisplayPort input
terminal
terminal
One input system
available.
available.
CAUTION
• When connecting an external sensor for calibration to the USB port, cable length must not exceed 3 m. Otherwise,
communication error may occur and correct calibration may not be possible.
• Directly connect external sensors and USB memory without using a hub.
Note
• Dual Link HD-SDI is used for connecting two input systems (
• Both FAT16 and FAT32 USB memory devices are supported.
• Proper operation cannot be guaranteed for all USB memories.
• It may take 10 seconds or more for the USB memory to be recognized. When "Settings Export/Import" is executed while
• Proper operation cannot be guaranteed for all USB memories.
• It may take 10 seconds or more for the USB memory to be recognized. When "Settings Export/Import" is executed while
the USB memory is being recognized, the message "Detecting USB memory." will be displayed.
COP
Y