Canon DP-V3010 说明手册

Operating the Display Controller

Using the Channel (CH) Button

You can assign channels (various settings related to input signal) to the CH buttons on the display controller and switch
channels instantly.

1. Press the MENU button to open the OSD menu.

2. Select "System Settings"→"Display Controller Channel" and press the SET button.

A new window opens and displays button names CH1 to CH4.

3. Select a button name with the

buttons and press the SET button.

The selection frame moves to next OSD menu level.

4. Select the channel to assign with

See "Channel Settings" (

40) for the configurable settings.

5. Press the SET button.

The setting is confirmed.

The channel buttons on the display controller are preset with the following factory defaults.

CH1

CH2

CH3

CH4

Input Configuration

3G/HD-SDI 1

3G/HD-SDI 2

Dual Link

HD-SDI

DisplayPort

Select Input Signal

4K Input

Format

Automatic

Color Range

Full

Automatic

Internal Sync

Off

Picture Mode

DCI-P3

Channel Name

(Blank)

Checking Signal Information and Status of the Main Unit

The video display is equipped with a banner function which displays signal information or the status of the main unit.

1. Press the SET button when the OSD menu is closed.

The channel name, signal information, and status of the main unit will be displayed in the banner. It will automatically
disappear after 4 seconds.

Note

• For more detailed signal information, please refer to the section on "Signal Information" (

• The "Detecting sync." banner will continue to appear until the input signal is synchronized.

COP