Canon DP-V3010 说明手册
38
OSD Menu
Item
Setting Options (underline indicates factory default)
Calibration
Performs calibration based on set target values when "User 1-7" is selected for "Picture Mode".
Note
• When "Luminance" is set to high brightness, it may be calibrated beyond the brightness
adjustment range and set lower than the target value depending on the "Color Temperature"
setting. In that case, set the "Luminance" again.
setting. In that case, set the "Luminance" again.
Luminance
Sets the target brightness.
48 to 200 cd/m
48 to 200 cd/m
2
Color
Temperature
Temperature
Sets the target color temperature.
D93, D65, D61, D60, D56, D50, DCI-P3: Select from preset color temperatures.
Custom: If you make adjustments by "x, y", the "Custom" mode automatically starts.
x, y: You can adjust CIE x, y in increments of 0.001.
D93, D65, D61, D60, D56, D50, DCI-P3: Select from preset color temperatures.
Custom: If you make adjustments by "x, y", the "Custom" mode automatically starts.
x, y: You can adjust CIE x, y in increments of 0.001.
x: 0.260 to 0.360 (in 0.001 increments)
y: 0.260 to 0.360 (in 0.001 increments)
Gamma
Sets the target gamma.
2.2, 2.35, 2.4, 2.6, Canon Log to WideDR 1.1
2.2, 2.35, 2.4, 2.6, Canon Log to WideDR 1.1
Color Gamut
Sets the target color gamut.
SMPTE-C, EBU, ITU-R BT.709, Adobe RGB, DCI-P3, Native
SMPTE-C, EBU, ITU-R BT.709, Adobe RGB, DCI-P3, Native
Start
Performs calibration.
LUT Import
LUT can be imported when "User 1-7" or "Canon Log" is selected for "Picture Mode".
LUT Type (Gamma, Color Gamut): Select the LUT type.
File Name: Select a file.
Base Color Gamut (SMPTE-C, EBU, ITU-R BT.709, Adobe RGB, DCI-P3, Native): Select the
color gamut used when creating the LUT (when "Color Gamut" under "LUT Type" is selected).
Execute: Performs import.
LUT Type (Gamma, Color Gamut): Select the LUT type.
File Name: Select a file.
Base Color Gamut (SMPTE-C, EBU, ITU-R BT.709, Adobe RGB, DCI-P3, Native): Select the
color gamut used when creating the LUT (when "Color Gamut" under "LUT Type" is selected).
Execute: Performs import.
Anchor Adjustment
Temporarily saves parameters while adjusting SHARPNESS, CHROMA, BRIGHTNESS, and
CONTRAST (anchor point setting).
OK: Performs anchor point setting.
Cancel: Returns to the previous screen without setting anchor point.
CONTRAST (anchor point setting).
OK: Performs anchor point setting.
Cancel: Returns to the previous screen without setting anchor point.
Reset
Return "Picture Mode" to factory default. Note that in "User 1-7" mode where you are performing
calibration, the setting returns to the value after calibration instead of the factory default.
When selected, the message "Reset Adjustment settings to defaults?" appears.
OK: Performs reset.
Cancel: Returns to the previous screen without resetting.
calibration, the setting returns to the value after calibration instead of the factory default.
When selected, the message "Reset Adjustment settings to defaults?" appears.
OK: Performs reset.
Cancel: Returns to the previous screen without resetting.
Deleting imported LUT
When you select "OK" for "Reset" and the resetting process is completed, a message is displayed to
ask you if you want to delete the LUT.
Erase: The LUT will be deleted.
Cancel: You can go back to the top screen without deleting the LUT.
When you select "OK" for "Reset" and the resetting process is completed, a message is displayed to
ask you if you want to delete the LUT.
Erase: The LUT will be deleted.
Cancel: You can go back to the top screen without deleting the LUT.
COP
Y