BMW 2008 528xi Sedan 业主指南

riv

uni

iga

Locking safety belt

Secure the child restraint system with the
belt.

Pull out the belt webbing completely.

Allow the belt webbing to be pulled in and
pull taut against the child restraint system.
The safety belt is locked.

Unlocking safety belt

Open the belt buckle.

Remove the child restraint system.

Allow the belt webbing to be pulled in com-
pletely.

LATCH child restraint fixing system

LATCH: Lower Anchor and Tethers for CHil-
dren.

Follow the system manufacturer's
instructions on installation and use of

LATCH child restraint systems in order not to
impair their protective function.

Before attaching the LATCH child's seat, pull
the belt away from the region of the child
restraint fixing system.

Make sure that the LATCH mounts have
properly clicked into place and that the

child restraint system is resting snugly against
the backrest. Otherwise, the protective action
may be impeded.

Sedan: rear seats

The anchor points for the LATCH anchors are
located at the positions indicated by arrows in
the gap between the seat and the backrest.

Sedan: rear seats with through-loading
system*

The anchor points for the LATCH anchors are
located behind the indicated protective caps.
Remove the cover caps before mounting the
child's seat.

Sports Wagon: rear seats

The anchor points for the LATCH anchors are
located behind the indicated protective caps
and are covered again after the child's seat is
removed.

Child restraint system with tether strap

Only use the tether-strap mounting
points to secure child restraint systems,

otherwise the mounting points could be dam-
aged.