Behringer C-1U 用户手册

C-1U User Manual

Mac OS:
5)  Adjust the recording level as required, using Audio Midi Setup in Mac OS.

Complete the following steps should you want to use your C-1U by default in 
other applications:

Select the C-1U in the pull-down menu of Sound recording by clicking 
on Sounds and Audio Devices in the Control Panel and then clicking 
the tab Audio

Select C-1U as Default Input found under the tab Audio Devices in Audio Midi 
Setup of Mac OS

To get the sound you want, try changing the mic position relative to the sound source or 
even move the microphone around in the recording room of your studio. Adjusting the 
angle at which walls face the sound source can also be helpful. Only when the desired 
basic sound has been achieved, should you start to use equalizers and signal processors, 
if any at all (remember: less is often more!).
Due to the extremely linear frequency response and the high sonic resolution of your C-1U, 
there is no need for high-frequency “EQing” that can heavily influence the signal and 
unnecessarily increase the noise level. The C-1U provides that much-desired transparency 
which often gets lost during recording and mixing.