Raritan Computer Paragon II 255-30-6000-00 用户手册
Channel Configuration
98
This menu displays one channel portʹs information in each row. If the
Paragon system detects a powered device on that channel port, it will
display the text in that row in green; otherwise, it will display it in black.
Again, there are two panels in this menu—left and right panels, indicated
by the right‐pointing arrow ( ) at the top of the menu. The fields and
columns on the left panel of this menu:
Paragon system detects a powered device on that channel port, it will
display the text in that row in green; otherwise, it will display it in black.
Again, there are two panels in this menu—left and right panels, indicated
by the right‐pointing arrow ( ) at the top of the menu. The fields and
columns on the left panel of this menu:
• ChID: The channel portʹs number.
• Name: The name of the device attached to that channel port. Device
• Name: The name of the device attached to that channel port. Device
names are case‐sensitive and may be up to twelve alphanumeric
characters long. As shown with channel port #1 in and elsewhere,
you may leave a device name blank if you wish, but we do not
recommend this.
characters long. As shown with channel port #1 in and elsewhere,
you may leave a device name blank if you wish, but we do not
recommend this.
• Scn: Displays the deviceʹs individual scan rate (the length of time that
the system pauses while scanning that channel port for those users
who set their Scan Mode to “Individual” rather than “Global”). Using
leading zeroes if necessary, type a two‐digit number of seconds from
01 to 24, or use the Ï and Ð keys to increase and decrease the current
value by 1 respectively. The default setting is 03.
who set their Scan Mode to “Individual” rather than “Global”). Using
leading zeroes if necessary, type a two‐digit number of seconds from
01 to 24, or use the Ï and Ð keys to increase and decrease the current
value by 1 respectively. The default setting is 03.
Use the arrow keys, Tab, Shift + Tab, Page Up, and Page Down to move
within this menu and its submenus. Press Enter to edit a highlighted field;
it will turn green. When you finish editing a field, press Enter followed
by S to save the changes, or press Esc to abort them.
within this menu and its submenus. Press Enter to edit a highlighted field;
it will turn green. When you finish editing a field, press Enter followed
by S to save the changes, or press Esc to abort them.
While the cursor is in the Device column, press Tab or Î key to move to
the right panel of this menu and display device group information: The
Group columns display which groups (if any) the device has been
assigned to.
the right panel of this menu and display device group information: The
Group columns display which groups (if any) the device has been
assigned to.