Raritan Computer Paragon II 255-30-6000-00 用户手册
Case 10. Upgrading the Firmware of User Stations
xx
3. Unzip the downloaded file. There are a file named
ParagonUpdate_xxx.exe (xxx represents the version) and a firmware
file for the user station. If using the P2‐EUST, the firmware file is
named EUST‐xxx.hex. If using the P2‐UST, the firmware file is named
V5‐xxx.hex (xxx represents the version).
file for the user station. If using the P2‐EUST, the firmware file is
named EUST‐xxx.hex. If using the P2‐UST, the firmware file is named
V5‐xxx.hex (xxx represents the version).
4. Double click “ParagonUpdate_xxx.exe” to execute the program.
5. Enter the information about the user station in the Paragon Update
utility. For example:
In the Name column, type P2-EUST-1
In the IP address/Serial column, select <Default Serial>
In the Port column, type 2. This represents the serial port—COM2
6. Ensure the checkbox before the user station is selected ( ).
7. Click Load Hex File to select the firmware file.
8. To start the upgrade, click Send To Paragon Æ Yes.
9. Once the upgrade is completed, a message appears.
See General Update Procedure (on page 153) and Paragon Manager
User Guide on the manual CD for details.
User Guide on the manual CD for details.