VIVOTEK RX7101 用户手册
- 9 -
www.vivotek.com
T:
886-2-82455282
F:
886-2-82455532
Address, the green LED will blink every second.
The Video Receiver will first detect Ethernet. If it does not connect to Ethernet, the
system booting will fail. Please connect the Ethernet cable and power on again. When
system boot up, the green LED will flash every second as heartbeat to indicate alive. If
the green LED is off, please check the network connections. When system is alive, go
to next paragraph “Software installation”.
system booting will fail. Please connect the Ethernet cable and power on again. When
system boot up, the green LED will flash every second as heartbeat to indicate alive. If
the green LED is off, please check the network connections. When system is alive, go
to next paragraph “Software installation”.
Software installation
At the end of the hardware installation, users can use Installation Wizard program
included in the product CDROM to find the location of the Video Receiver. There may be
many Video Receivers in the local network. Users can differentiate the Video Receiver
with the MAC. The MAC is printed on the label on the back of the Video Receiver body.
For more detail. please refer to the user’s manual of Installation Wizard 2.
Once installation is complete, the Administrator should proceed to the next
section "Initial access to the Video Receiver" for necessary checks and
configurations.
included in the product CDROM to find the location of the Video Receiver. There may be
many Video Receivers in the local network. Users can differentiate the Video Receiver
with the MAC. The MAC is printed on the label on the back of the Video Receiver body.
For more detail. please refer to the user’s manual of Installation Wizard 2.
Once installation is complete, the Administrator should proceed to the next
section "Initial access to the Video Receiver" for necessary checks and
configurations.