Remote Technologies IR-PRO T3 用户手册

下载
页码 34
T3 Universal System Controller 
 
often. Since the T3 can safely be charged after each use, a docking 
station is included for convenience. If left out of the docking 
station, the T3 will remain in sleep mode for 1 – 2 months before 
shutting down. At that point the battery must be recharged.  
The T3 Docking Station can be placed on a flat surface such as a 
shelf or table, or it can be mounted to a wall using the mounting 
holes on the back of the unit. 
If the T3 battery capacity is reduced to approximately 25 percent, 
a low battery icon will appear in the top center of the display: 
 
 
 
The low battery icon will change color to red if the battery 
capacity becomes critically low: 
 
 
 
At this point the T3 must be placed into the docking station to 
recharge the battery. 
The docking station LED illuminates to indicate a charge in 
progress. The LED will turn off when the battery in the unit is 
fully charged. 
A fully discharged battery will take approximately 2-4 hours to 
completely re-charge. 
The  T3 can remain in the docking station indefinitely without 
damage to the battery.