Polaroid Polaview 220 用户手册

Whenever you connect the projector to a computer or

video source for the first time, the projector defaults to the
factory settings. Due to operational differences between
computers and video sources, it may be necessary to make
minor adjustments to the settings. See 

Image optimization

in Chapter 4, 

Using the projector for more information. The

projector stores any modified settings, even when the
power is turned off. 

Audio and video sources must be connected to the

same computer or video source to be selected simultane-
ously.

7 To activate audio, connect the audio cables (from your com-

puter, compact disc player, stereo, etc.) to the STEREO port
that corresponds to the source connected in step 

. The

audio source plays through speakers built into the projector.
You may also connect amplified speakers or headphones to
the OUTPUT connector labeled STEREO or L and R. This
automatically deactivates the projector speakers.

If you connect a mono or single-jack stereo source to

the left (L) audio port (with nothing plugged into the right
(R) audio port), the sound emanates from both speakers.

8 Begin your presentation.

For setup procedures for the Computer IR (infrared)

Receiver, refer to the separate instruction manual included
in your Computer IR Receiver Kit.

6 Introduction