Pyramat G-Flex Game Booster 用户手册

Unable to hear sound.

Unable to connect to the

gaming console.

Sound only plays from one

speaker.

No sound will play from the

G-Flex.

Missing or broken cables or

mini adapters.

Problem

Possible Cause

Solution

The RCA audio cables are not

connected properly.

The batteries are old or not

installed properly.

Cables are incorrectly connected.

Your video game console has a

coaxial cable instead of an RCA

audio cable.

RCA cables are incorrectly

connected.

Audio/video device has a single

MONO audio output (a common

problem when connecting to an

older TV or VCR).

RCA audio cables are incorrectly

connected.

Check the connection on your audio/video device. The RCA cables should be

connected to the AUDIO OUTPUT jacks. Check the connection on your rocker.

The RCA cables (red and white) must be in the input jacks.

Check to make sure the batteries are working. The power light on the control

panel should be on when batteries are installed correctly and have a full

charge.

Check that the console’s RCA audio cables are connected to the G-Flex’s RCA

audio cables (red to red and white to white).

Check that the G-Flex RCA audio cables (red and white) are connected to the

AUDIO INPUT jacks on the rocker.

Check that the console’s RCA video cable (usually yellow) is connected to the

input jack on the TV.

If your video game console has an RCA audio cable, then connect the RCA

audio cable extenders to the red and white audio cables from the video game

console. Connect the supplied RCA audio cable to the video game console’s

red and white audio cables and plug into the input jacks on the G-Flex.

Use the instructions provided by the video game console’s manufacturer to

hook up the video game console to an intermediary device (such as a TV,

DVD, VCR, satellite receiver, etc.). Your intermediary device must have

both a coaxial input jack (the standard jack for cable TV) and an RCA audio

output jack.

Purchase an RCA replacement cable directly from the console manufacturer.

Check that all RCA audio connections are correct – red to red, white to white.

If your audio source is mono only, as found mainly on older model TVs and

VCRs, an RCA “Y” adaptor (1 male to 2 male, not included) is needed to send

the signal to both speakers. Please note: the use of this type of adapter will

not produce a true stereo sound. For optimal performance, it is recommended

that you connect your G-Flex to stereo outputs only.

RCA audio cables (red and white) must be plugged into AUDIO OUTPUT jacks

in the source device (TV, VCR, etc.). If you are plugging the cables into the

jacks in the front of your TV, these are most likely AUDIO INPUT jacks.

Replace items immediately. Replacement cables and mini adapters can be

purchased at your local audio accessory dealer.

Need Help? Visit our website at www.pyramat.com, send an e-mail to

service@pyramat.com

or call toll-free at

877-591-1012.

TROUBLESHOOTING GUIDE