Tektronix Camcorder 2200 用户手册
2-94
Section 2— Control Panel Descriptions
) takes the output of an
M/E Keyer, sends it to the Frame Store module, then returns the
output of the Frame Store to the Mix/Wipe circuit of the same
M/E in the switcher. See
output of the Frame Store to the Mix/Wipe circuit of the same
M/E in the switcher. See
inserting the Frame Store right into the M/E, between the Keyer
and the Mix/Wipe system.
and the Mix/Wipe system.
1.
To select Frame Store looping mode, first press the
Aux Bus
button on the main menu panel, then press the
BUS SELECT
soft button in the Aux Bus Menu to select the Aux Bus to be
looped (
looped (
AUX 2
for the Model 2200).
2.
With the
EFF LOOP MODE
button, select
FRAMESTORE.
This
sends the output of the selected Keyer to the Frame Store
option module and connects the output of the Frame Store to
the Mix/Wipe system of the same M/E.
option module and connects the output of the Frame Store to
the Mix/Wipe system of the same M/E.
3.
On the Switcher’s
Pvw Aux
bus, select the Keyer output to be
sent to the Frame Store by pressing
Aux 2 Effects Send Only
button on the Model 2200.
NOTE:
The Keyer
A
selections apply only when in layered mode.
M/E
KEYER
M/E
MIXER
Key 2
A Bkgd
B Bkgd
Key 2
Key 1
M/E Out
Aux Bus 4 (Model 4000)
or Aux Bus 2 (Model 2200)
0844-01
Effects Return Input
SWITCHER
A Bkgd
B Bkgd
Key
1
FRAME STORE
Figure 2-20. Effects Send Frame Store Looping Mode