Tektronix Camcorder 2200 用户手册
3-35
External Interface Menu
For a DPM-700:
1.
Set the
DPM TYPE
to
OTHER FIXED.
2.
Turn the
EFF SEND DELAY
soft knob to select 2 fields. It is
important that this be set correctly.
The
CONTROL DELAY
soft knob has no effect with the DPM-
700.
3.
Set
PORT ASSIGN
to
NONE.
4.
Set
CHANNEL ROUTING
to
OFF.
For devices which must be set up manually:
1.
Program all other required parameters
2.
Set
EFF SEND DELAY
to 0
3.
Select
BLACK
on the Aux Bus feeding the external device
NOTE:
A delay has been introduced when changing DPM TYPE. This
delay allows a new DPM TYPE to be chosen without cycling through
intermediate DPM Types. Once the desired solution has been made, the
new DPM TYPE will be set 2 seconds later.
intermediate DPM Types. Once the desired solution has been made, the
new DPM TYPE will be set 2 seconds later.
4.
Turn the M/E Effects Send button on and off and look for a
flash of the wrong video (BLACK) as Effects Send is turned
on. (The flash will appear on the M/E output for the Effects
Send you selected.)
flash of the wrong video (BLACK) as Effects Send is turned
on. (The flash will appear on the M/E output for the Effects
Send you selected.)
5.
Increase the
EFF SEND DELAY
one field at a time until there is
no video flash when turning on Effects Send.
NOTE:
Increasing the EFF SEND DELAY any further will not change
the Effects Send appearance. It will, however, delay the entry into Effects
Send unnecessarily.
Send unnecessarily.