National Instruments Field Point cFP-Al-110 用户手册

Indicators .......................................... Green POWER and 

READY indicators

Weight

FP-AI-110................................... 140 g (4.8 oz)
cFP-AI-110................................. 110 g (3.7 oz)

Power from network module ............ 350 mW

Channel-to-ground isolation

Continuous ................................. 250 V

rms

, Measurement 

Category II

Dielectric withstand.................... 2,300 V

rms

 (test duration 

is 5 s)

Channel-to-channel isolation ............ No isolation between 

channels

FieldPoint modules are intended for indoor use only. For outdoor 
use, they must be mounted inside a sealed enclosure.

Operating temperature ...................... –40 to 70 °C

Storage temperature .......................... –55 to 85 °C 

Humidity ........................................... 10 to 90% RH, 

noncondensing

Maximum altitude............................. 2,000 m; at higher altitudes 

the isolation voltage ratings 
must be lowered.

Pollution Degree ............................... 2

These specifications apply only to the cFP-AI-110. 
NI recommends Compact FieldPoint if your application 
is subject to shock and vibration. 

Operating vibration, random 
(IEC 60068-2-64).............................. 10–500 Hz, 5 g

rms

Operating vibration, sinusoidal 
(IEC 60068-2-6)................................ 10–500 Hz, 5 g