Kraus USA Kralin Wireless Access Point 54MB Single Port Cod. KR.XJ 用户手册

www.kraun.it

User’s Manual

If the result displayed is similar to that shown in figure 4-1, the connec-

tion between your PC and the AP has been established. 

If the result displayed is similar to that shown in figure 4-2, it means that 

your PC has not connected to the AP. Please check it following these 

steps:

1. Is the connection between your PC and the AP correct?
Note: The LED of LAN port on the AP and LED on your PC’s adapter 

should be lit.

2. Is the TCP/IP configuration for your PC correct?
Note: If the AP’s IP address is 192.168.1.1, your PC’s IP address must 

be within the range of 192.168.1.2 ~ 192.168.1.254, the gateway 

must be 192.168.1.1 .

This chapter describes each Web page’s key functions.

With a Web-based (Internet Explorer or Firefox) utility, the Wireless Ac-

cess Point 54MB Single Port is easy to configure and manage. The Web-

based utility can be used on any Windows, Macintosh or UNIX OS with 

a Web browser.

Connect to the AP by typing http://192.168.1.1 in the address field of 

Web browser.

After a moment, a login window will appear similar to that shown in 

Figure 5-2. Enter admin for the User Name and Password, both in lower 

case letters. Then click the OK button or press the Enter key.

Note: If the above screen does not prompt, it means that your 

Web browser has been set to a proxy. Go to Tools menu>Internet 

Options>Connections>LAN Settings, in the screen that appears, cancel 

the Using Proxy checkbox, and click OK to finish it.

After your successful login, you can configure and manage the AP. There 

are six main menus on the left of the Web-based utility. Submenus will 

be available after you click one of the main menus. The six main menus 

are: Status, Network, Wireless, DHCP, Wireless Advanced Settings and 

System Tools. On the right of the Web-based utility, there are the detailed 

explanations and instructions for the corresponding page. To apply any 

settings you have altered on the page, please click the Save button. 

There are the detailed explanations for each Web page’s key functions 

below. 

The Status page displays the AP’s current status and configuration. All 

information is read-only.

1. Network
  This field displays the current settings or information of the Network, 

including the MAC address, IP address and Subnet Mask.

2. Wireless
  This field displays basic information or status of the wireless func-

tion, including Operating Mode, SSID, Channel, Mode, MAC Address 

and IP Address.

3. Traffic  Statistics
  This field displays the AP’s traffic statistics. 
4. System  Up  Time
  The time of the AP running from it’s powered on or reset.

You can configure the IP parameters of Network on this page.