Kompernass AUTOMATIC SHREDDER KH4407 用户手册
- 6 -
Importer
KOMPERNASS GMBH
BURGSTRASSE 21
44867 BOCHUM, GERMANY
BURGSTRASSE 21
44867 BOCHUM, GERMANY
www.kompernass.com
Troubleshooting
If the material to be shredded jams:
This means that you have attempted to feed too
much material into the appliance
(max. 7 sheets 80g/m
This means that you have attempted to feed too
much material into the appliance
(max. 7 sheets 80g/m
2
paper, max. 1 credit card,
max. 1 CD/DVD).
• Place the switch
• Place the switch
w
in position
should the item
to be shredded become jammed. The appliance
now goes into reverse and the material to be
shredded is returned.
now goes into reverse and the material to be
shredded is returned.
• Place the switch
w
in position
(OFF), as
soon as the jammed item is returned.
If the appliance suddenly ceases operation:
This means that the appliance has overheated and
the automatic safety cut-out has activated itself.
This means that the appliance has overheated and
the automatic safety cut-out has activated itself.
Important: Remove the power plug from the
wall socket to avoid an unintended starting of
the appliance
wall socket to avoid an unintended starting of
the appliance
• To switch the appliance off, move the switch
w
into the middle position
(OFF).
• Allow the appliance to cool down.
• Reinsert the power plug into the socket.
• Switch the appliance on, in that the switch
• Reinsert the power plug into the socket.
• Switch the appliance on, in that the switch
w
is placed in the position
.
If the appliance doesn`t allow itself to be
switched on:
• Check that the plug is correctly connected to a
switched on:
• Check that the plug is correctly connected to a
wall socket.
• Try out a different wall socket.
• The appliance is probably defective. Have the
• The appliance is probably defective. Have the
appliance checked by qualified specialists.
When the appliance is switched on,
however, the shredding process will not start:
• The appliance has overheated and triggered the
however, the shredding process will not start:
• The appliance has overheated and triggered the
automatic safety switch-off.
Important: Remove the power plug from the
wall socket to avoid an unintended starting of
the appliance.
wall socket to avoid an unintended starting of
the appliance.
• To switch the appliance off, move the switch
w
into the middle position
(OFF).
• Allow the appliance to cool down.
• Replace the power plug into the socket.
• Switch the appliance on, in that the switch
• Replace the power plug into the socket.
• Switch the appliance on, in that the switch
w
is placed in the position
.
The cutter attachment
q
is not correctly placed.
• Place the cutting attachment
q
in the correct
position.
IB_KH4407_E26057_LB6 20.03.2009 9:39 Uhr Seite 6