Kidde 1276E 产品宣传页

The Kidde 1276E smoke alarm provides the same features
and quality you expect in a Kidde manufactured product
plus a front load battery door.  The front load battery
operation speeds installation and reduces battery replace-
ment by eliminating the need to remove the alarm from
the ceiling. The alarm incorporates the other contractor
friendly features pioneered by Kidde, including alarm
memory, battery pull tab, dust cover, AC quick connect
and others.

(cont.)

• Battery Door – Provides easy access, which reduces the

installation time and battery replacement time. Unique 
design ensures owner is aware of battery backup, 
because the door will not close if there is no battery or 
if battery is installed incorrectly.

• Smart Interconnect – Interconnects up to 24 Kidde 

devices including smoke alarms, CO alarms and heat 
detector. The interconnect system should not exceed 
the NFPA interconnect limit of 12 smoke alarms and/or 
18 initiation alarms. With 18 alarms interconnected, 
it is still possible to interconnect up to a total of 
6 strobe and/or relay devices.

• Battery Pull Tab – Prevents draining battery until 

permanent AC power is connected thus reducing 
callbacks for battery replacement.

• Dust Cover – Protects the alarm’s sensor from dust and 

debris during construction period.

• AC Quick Connect  – Wiring pigtail installs quickly with 

snap-on harness. Uses same Kidde standard quick-
connect, allowing for easy upgrade.

• Alarm Memory – Flashing green LED indicates 

origination alarm after condition occurs. Alarm memory 
also incorporates an energy management feature that 
“shuts down” the memory function if AC power is 
absent. This helps reduce battery drain – especially 
during the construction phase.

• Tamper Resistant Features – Provides two tamper 

resistant options: The unit can be locked to the 
mounting bracket to prevent the alarm from being 
removed from the ceiling or wall. The battery door can 
also be locked to prevent battery removal. Neither 
option requires the use of additional components.

Change battery without removing alarm from bracket

Tests unit’s electronic circuitry, horn and battery function
and resets its memory after an alarming condition occurs 

Temporarily silences nuisance alarms

Allows for fast installation and perfect alignment