Eicon Networks 1530 用户手册
Command Line Interface
116
SET DHCP DOMAIN domain
Defines the domain name returned in response to a DHCP request, when the DHCP server is
enabled.
enabled.
Range: 0-31 characters, no spaces.
SHOW DHCP CONFIGURATION
Displays the setting of all DHCP related parameters.
SET DHCP SERVERADDR { PRIMARY | SECONDARY } DHCPaddr
Defines the address of the DHCP servers where DHCP requests are to be forwarded, when
DHCP relay is enabled.
DHCP relay is enabled.
Primary: The IP address that follows is for the primary DHCP server.
Secondary: The IP address that follows is for the secondary DHCP server.
DHCPaddr: IP address of the DHCP server.
SET DHCP MAXHOPS numHops
When a DHCP request is received with a hop count greater than the number specified, the
request is discarded. Only valid when DHCP is set to relay.
request is discarded. Only valid when DHCP is set to relay.
numHops: Maximum hop count supported for DHCP relay requests.
Range: 1-16.
Default: 4.
SET DHCP DELAY seconds
Defines how long to wait before relaying a DHCP request. Since DHCP requests and responses
are broadcast to all stations on a LAN, the Eicon 1530 must check that no other DHCP server
has responded to a DHCP request before the request is forwarded to the external network.
are broadcast to all stations on a LAN, the Eicon 1530 must check that no other DHCP server
has responded to a DHCP request before the request is forwarded to the external network.
seconds: Number of seconds to wait before forwarding a DHCP request.
Range: 1-30 seconds.
Default: 4 seconds.
SHOW DHCP TRACE [memsize [framesize]]
Starts a DHCP trace, or displays an active DHCP trace.
memsize: RAM reserved to store the trace on the Eicon 1530.
Range: 1-63 KB. Default: 16 KB.
Range: 1-63 KB. Default: 16 KB.
framesize: The number of characters to display in each frame.
STOP DHCP TRACE
Stops an active DHCP trace.