Eicon Networks 1530 用户手册
Command Line Interface
142
SET PORT XT8 XT8Maximum
Defines the DCD(on) -> DCD(off) maximum delay. This is the maximum length of time the
remote device is allowed to transmit data. If this limit is exceeded the line is disconnected. This
parameter is only used for half-duplex lines.
remote device is allowed to transmit data. If this limit is exceeded the line is disconnected. This
parameter is only used for half-duplex lines.
Range: 0-9999 milliseconds.
Default: 0 (disabled).
SHOW PORT CONFIGURATION
Displays the configuration settings for the VHSI port.