Fujitsu Siemens Computers X103 SFF 用户手册
System expansions
VFY-SCED103S, edition 1
31
Installing the cross-piece
2
1
1
►
Place the cross-beam (2) in the casing and
secure it with the two screws (1). Make
sure that the screw holes are exactly
aligned. Otherwise, turn the cross-beam
over.
secure it with the two screws (1). Make
sure that the screw holes are exactly
aligned. Otherwise, turn the cross-beam
over.
►
Installing and removing drives
In the standard model the device may be equipped with the following drives:
●
●
one accessible 3 ½ inch drive (floppy drive)
●
one non-accessible 3 ½ inch drive (floppy drive)
●
one accessible 5 ¼ inch drive (e.g. DVD or CD ROM drive)
IDE drives and serial ATA drives
IDE drives and serial ATA drives are supported by default.
IDE drives and serial ATA drives are supported by default.