Fortress Technologies FS-20 用户手册
7
WIRING: 2-PIN LED / 2-PIN Program-Valet Button (26 gauge wires)
Mount Status LED in a visible location on the Dash or Console. Connect the small 2-pin plug from the LED to the
control module. Note: Connectors are designed so that they will only plug into their appropriate slots.
Mount the Valet/Program/Override button in a suitable location. Connect the 2-pin plug from the Switch to the
control module. Note: Connectors are designed so that they will only plug into their appropriate slots.
VALET / PROGRAM SWITCH
STATUS LED
POWER DOOR LOCK WIRING
3 PIN DOOR LOCK PLUG (Optional):
GREEN: (-) Negative pulse for LOCK
RED: +12V Coil Power for using relays.
BLUE: (-) Negative pulse for UNLOCK
RED: +12V Coil Power for using relays.
BLUE: (-) Negative pulse for UNLOCK
Hint: Determine the type of locking system the vehicle has before connecting any wires. Incorrect connection
could result in damage to the alarm and/or the vehicle’s locking system. Some vehicles are equipped with Class 2
DATA door locks systems which require a bypass module to control the door locks. Please refer to vehicle wiring
color chart which is supplied via TechWeb (basic service) for authorized dealers.
could result in damage to the alarm and/or the vehicle’s locking system. Some vehicles are equipped with Class 2
DATA door locks systems which require a bypass module to control the door locks. Please refer to vehicle wiring
color chart which is supplied via TechWeb (basic service) for authorized dealers.