Multi Tech Equipment MultiModemZBA MT5634ZBA-V-V92 用户手册
4 AT Commands, S-Registers, & Result Codes
39
MultiModemZBA-V-V92 User Guide
Command:
#P
n
Set 11-bit Parity
Values:
n = 0 or 1
Default:
2
Description:
#P0
No parity.
#P1
Odd parity.
#P2
Even parity.
Command:
#S
x
Enter Setup Password
Values:
x= password (1–8 characters, case sensitive)
Default:
MTSMODEM
Description:
Enters the callback security setup password.
Command:
#S=
x Store Setup Password
Values:
x= password (1–8 characters, case sensitive)
Default:
MTSMODEM
Description:
Stores a new callback security and remote configuration setup
password.
password.
Command: +++AT<CR> Escape Sequence
Values:
Values:
n/a
Description:
Puts the modem in command mode (and optionally issues a
command) while remaining online. Type +++AT and up to six
command characters, then press ENTER. Used mostly to issue
the hang-up command: +++ATH<CR>.
command) while remaining online. Type +++AT and up to six
command characters, then press ENTER. Used mostly to issue
the hang-up command: +++ATH<CR>.
Command: %%%AT<CR> Remote Configuration Escape Sequence
Values:
Values:
n/a
Description:
Initiates remote configuration mode while online with remote
modem. The remote configuration escape character (%) is de-
fined in register S13.
modem. The remote configuration escape character (%) is de-
fined in register S13.