Carson SA-500-10 28V 用户手册

 

TB0353A 

Page 2 of 8 

09/27/05 

AMPLIFIER INPUT POWER:  9-16 Volts DC, 8 Amps DC per 100W Speaker   (SA-500-10 14) 
 

18-32 Volts DC, 4 Amps DC per 100W Speaker   (SA-500-10 28) 

 
SIREN MODE 
OUTPUT POWER: 

15 VDC input, 100W speaker(s)   (SA-500-10 14) 

30 VDC input, 100W speaker(s)   (SA-500-10 28) 

 

One speaker – 105 Watts RMS 
Two speakers - 180 Watts RMS 

14 VDC input, 100W speaker(s)   (SA-500-10 14) 

28 VDC input, 100W speaker(s)   (SA-500-10 28) 

 

One speaker – 40 Watts RMS 
Two speakers - 80 Watts RMS 

700Hz - 1450Hz  Nominal 

 
CYCLE RATES: 

WAIL - 15 cycles/min 

 

YELP - 210 cycles/min 

 

PHASER - 15 cycle/sec 

 

TWO-TONE – 1 cycle/min 

200Hz - 10KHz +/-3db 

 

Harmonic Distortion Less than 3% @ 1KHz   (SA-500-10 14) 

 

Harmonic Distortion Less than 7% @ 1KHz   (SA-500-10 28) 

RADIO INPUT 
SENSITIVITY: 

0.75VAC Input Min. for 40 Watts RMS Output (1 spkr) 

 
OPERATING 
TEMPERATURE: 

-15° F  to +140° F 

 
SIZE: 

6-1/8" Wide X 2-3/4" High X 5-7/8" Deep 

 
WEIGHT: 

5 pounds 

 
NIGHT VISIBILITY: 

Backlit front control panel when power is on 

 
PROTECTION: 

High Voltage – Siren output stops with input voltage above highest rating 

     

 

Stops high output power from blowing speaker 

Reverse Polarity – Fuse(s) blows when power is wired backwards 
Shorted Output – Fuse(s) blows if speaker shorts (a common problem) 

 
 
 
 
 
 

Due to continuous product improvements, we must reserve the right to change any specifications and information, 
contained in this manual at any time without notice. 
Carson Manufacturing Co., Inc. makes no warranty of any kind with regard to this manual, including, but not limited to, 
the implied warranties of merchantability and fitness for a particular purpose. 
Carson Manufacturing Co., Inc. shall not be liable for errors contained herein or for incidental or consequential 
damages in connection with the furnishing, performance, or use of this manual.