Avery ALS 206 用户手册

GB

Tool:
– 3 mm hexagon (Allen) screwdriver

The unwinder can be adjusted with core adapters [40B] 
to fit the inner diameter of the label roll. The adapters 
must be fitted and dismantled in different ways 
depending on this diameter:

– 38.1 mm (1”) core

£

Unscrew the screws [40A] (3 for each adapter) and 
remove the adapters.

– 76.2 mm (3”) core

£

Screw on the adapters, as is shown in Figure [40].

– 101.6 mm (4”) core

£

Screw on the adapters, as is shown in Figure [41].

£

Open the pressure roller [42B]. To do so, rotate the 
lever [42C] until the roller snaps up.

£

Release thumb screw [42A].

£

Align the pressure roller over the backing paper so 
that it is centred.

£

Close the pressure roller.

£

Screw the thumb screw tight.

[40] Core adapter positions for a core diameter of 76.2 mm.

[41] Core adapter positions for a core diameter of 101.6 mm.

[42] Setting the position of the pressure roller (B).