Avery ALS 206 用户手册

GB

Prerequisites:
– The label length must be specified.
– The label stop position must be set.

Configuration in dispensing mode:

£

Use the two right buttons to set the start offset (see 
“Online settings” on page 22).

Or use the function menu settings:

£

Call the 

LABEL SETUP > Start Offset

 function and set the 

start offset.

– The label should be flush with the front edge of the 

product:

£

Enter the distance between the product sensor and 
the dispensing edge [47A].

– The label should be stuck at a distance from the 

front edge of the product:

£

Increase the start offset by the distance [48A] to the 
product’s front edge.

[47] Distance between the product sensor (left) and the 

dispensing edge (right).

A

[48] Distance (A) between the label and the product’s front