Avery ALS 206 用户手册

下载
页码 58
3
C
ONTENTS
1.2 S
AFETY
 
INSTRUCTIONS
ALS
20x 
256
GB
1.2.1
Information and qualifications
Follow the instructions
WARNING!
Safe and efficient operation of the label 
dispenser can only be guaranteed if you 
observe all necessary information.
Product liability and warranty claims can 
only be asserted if the unit was operated in 
accordance with the directions in the 
manual.
£
Before operating the unit, read the 
operating instructions and all other notes 
carefully.
£
Observe the additional safety and 
warning notes on the label dispenser.
£
Only permit competent people to operate 
and configure the label dispenser.
Keep the product information at hand 
With respect to this manual:
£
It should be kept at the location where the 
unit is installed and be available to the 
operator.
£
It should always be legible.
£
If the unit is sold, the manual should be made 
available to the new owner.
£
The safety and warning notes affixed to the 
unit itself must be kept clean and legible. 
Missing or damaged signs must be replaced.
Ensure the required qualifications are met
£
Ensure that only trained and authorized personnel 
operate, configure and service the unit.
£
Only allow qualified and well-trained expert 
personnel or service technicians to perform 
configurations.
£
The responsibilities with regard to operation, 
configuration and maintenance should be clearly 
defined and consistently maintained. 
£
In addition, personnel should also be instructed on 
a regular basis in matters of occupational safety and 
environmental protection.
Qualification for operation
The instruction of personnel using the unit must ensure 
that:
– The operating personnel can use the unit on their 
own and safely.
– The operating personnel can remedy small 
operational disruptions on their own.
£
At least two people must be instructed in the unit’s 
usage. 
£
Enough label material must be provided for testing 
and instructional purposes.
Qualifications for configuring
The configuration of the controls requires 
qualified expertise:
– Personnel configuring the unit must be 
acquainted with the functionality of the label 
dispenser. 
– Personnel configuring the unit must be 
acquainted with the modes of operation 
within the facility in which the label dispenser 
is integrated.
– The personnel configuring the unit must be 
able to use the additional menus properly 
and appropriately for specific project 
requirements.
1.2
SAFETY INSTRUCTIONS