Aruba Networks FIPS 140-2 用户手册
13
Figure 6: AP-124 Bottom view
3.2.3 Aruba AP-125 TEL Placement
This section displays all the TEL locations on the Aruba AP-125. The AP125 requires a minimum of 3
TELs to be applied as follows:
TELs to be applied as follows:
3.2.3.1
To detect opening of the chassis cover:
1. Spanning the top and bottom covers on the left side
2. Spanning the top and bottom covers on the right
2. Spanning the top and bottom covers on the right
3.2.3.2
To detect access to restricted ports
3. Spanning the serial port
The tamper-evident labels shall be installed for the module to operate in a FIPS approved mode of
operation.
operation.
Following is the TEL placement for the Aruba AP-125: