Husqvarna 420 GN 用户手册

Compare the illustrations with your generator, to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.

A - Fuel Tank — Capacity of 1.32 U.S. gallons (5.0 L).

B - Circuit Breaker (AC) — A push-to-reset circuit breaker is

provided to protect the receptacle and generator against
electrical overload.

C - 120 Volt AC, 15 Amp, Duplex Receptacle — May be

used to supply electrical power for the operation of
120 Volt AC, 15 Amp, single phase, 60 Hz electrical,
lighting, appliance, tool, and motor loads.

D - Grounding Fastener — Consult your local agency having

jurisdiction for grounding requirements in your area.

E - 12 Volt DC, 8.3 Amp Accessory Jacks — May be used

to power 12 Volt DC electrical devices or recharge
12 Volt DC batteries.

F - Spark Arrester Muffler — Exhaust muffler lowers engine

noise and is equipped with a spark arrester screen.

G - Data Tag — Provides model, revision, and serial number

of generator. Please have these readily available when
calling for assistance.

H - Spark Plug — Access to engine spark plug.

J - Air Cleaner — Protects engine by filtering dust and

debris out of intake air.

K - Choke Lever — Used when starting a cold engine.

L - Recoil Starter — Used to start the engine.

M - Fuel Valve — Used to turn fuel supply on and off to

engine.

N - Engine Switch — Set this switch to “On” before using

recoil starter. Set switch to “Off” to stop engine.

Engine Identification — Provides model, type and code of
engine. Please have these readily available if calling for
assistance.

Oil Drain Plug — Drain engine oil here.

Oil Fill Cap — Check and fill engine with oil here.