DirecTV TV Receiver TR-6018 产品宣传页

Select Signal 

Meters.

In the box, it now 

gives you an 

AZIM (Azimuth 

Angle) and ELEV 

(Elevation Angle). 

These are the 

pointing angles 

you will need 

when you go to 

point the dish. 

Now select

Signal Strength to get to the Signal Meter.

Then, select the 

option. Enter 

the Zip Code 

for your current 

location. Then, 

press OK.

If Switch Type 

displays “SWM” 

or if given the 

option of 

selecting a Switch 

Type, select 

Multiswitch. 

Then, set the Dish 

Type for Round, 

18”, Single LNB, 

or 1 SATELLITE, 

depending on the wording used in your receiver. Press 

Continue.

Select System Setup.

Press Menu on 

your remote, 

and then select 

Setup.

In most receivers, the setup is done through the “Repeat Satellite Setup” option in your receiver menu. 

The following instructions are based on a D12 receiver. If your receiver differs from the options shown, 

you may need to consult your receiver manual. To access the “Repeat Satellite Setup” option, go through 

these steps. The wording and display used in your receiver may differ slightly.

In your receiver 

Menu, you will 

need to identify 

the Satellite 

Menu. The 

Satellite Menu 

will have an 

option for 

Satellite Setup.

You may be 

required to press 

the DASH (-) 

before proceeding 

(underneath #7 on 

the remote).